Karbonn K22 Plus SPD SC6531 Format Done With Volcano Tool V3.0.0

How to flash Karbonn K22+ using Volcano Tool? the below is the process to flash Karbonn K22+ with Volcano Tool V3.0.0. The karbonn K22+ has SPD SC6531 CPU, to flash the phone first read flash or download flash file then select the flash and format or do the wright flash option.

Karbonn K22+ CPU Info:

CPU TYPE:SC6531 [65310001]

FLASH ID: 00C8006000160000

Flash Type: SF_GD25LQ32                

Size:0x400000(4MB)

Karbonn K22 Plus SC6531 Format With Volcano Tool

Open volcano tool

Go to SPD tab

Select boot 15 (SC6531)

Click on Start

Connect the phone using volcano JIG Cable

Karbonn K22+ SPD SC6531 Format Done With Volcano Tool V3.0.0

Note: As the karbonn K22+ has SC6531 CPU, before do anything first Read flash of the phone, then you can format the phone, just select the flash file and format then click on start.

Karbonn K22+ Format Log Volcano Tool:

Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.08 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Setting...
  Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
  Pinouts setting complete!
   
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310001]
  FLASH ID: 00C8006000160000
  Flash Type: SF_GD25LQ32               
  Size:0x400000(4MB)
  Set to Factory successfully.